NEMA17 Stepper Motor 35 oz-in 1.8°/step

NEMA17 Stepper Motor 35 oz-in 1.8°/step
NEMA17 Stepper Motor 35 oz-in 1.8°/step
Product Code: 17HS3430
Availability: In Stock
Price: NZ$27.95
Ex Tax: NZ$24.30

4 or more NZ$25.95
Qty:     - OR -   Add to Wish List
Add to Compare

Nema 17 hybrid stepping motor suitable for many 3D printer Reprap machines

2-phase with 4-wire bipolar windings.

General Specification:

Shaft Diameter: 5mm with flat face

Step Angle: 1.8° (200 steps/rev)

Motor Length: 34 mm

Rated Current: 1.2 Amps per phase

Phase Resistance: 1.9 ohms

Phase Inductance: 2.5 mH

Holding Torque: 35 oz-in / 25 / 2.5

Detent Torque: 2.0

Inertia:34 g.cm2

Weight: 230g



Red: A+






Black: A+



Step angle accuracy: ±5%(full step,no load)

Resistance accuracy: ±10%

Inductance accuracy: ±20%

Temperature rise: 80°C Max(rated current,2 phase on)

Ambient temperature: -20° ~ +50°C

Insulation resistance:100MΩ  Min,500VDC

Insultion Strength: 500VAC for one minute

Stepper Motor
Holding Torque 35 oz-in, 25, 2.5
Max. Current 1.2 Amps per phase
Phase Inductance 2.5 mH
Winding Resistance 1.9 ohms

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

© MAKERshop 2021