NEMA17 Stepper Motor 74 oz-in 1.8°/step

NEMA17 Stepper Motor 74 oz-in 1.8°/step
NEMA17 Stepper Motor 74 oz-in 1.8°/step
Product Code: 17HS8401
Availability: In Stock
Price: NZ$31.95
Ex Tax: NZ$27.78

4 or more NZ$29.95
Qty:     - OR -   Add to Wish List
Add to Compare

Nema 17 hybrid stepping motor suitable for many 3D printer Reprap machines

2-phase with 4-wire bipolar windings.

General Specification:

Shaft Diameter: 5mm with flat face

Step Angle: 1.8° (200 step/rev)

Motor Length: 48 mm

Rated Current: 1.8 Amps per phase

Phase Resistance: 1.8 ohms

Phase Inductance: 3.2 mH

Holding Torque: 74 oz-in / 52 N.cm / 5.3 kg.cm

Detent Torque: 2.6 N.cm

Rotor Inertia:68 g.cm2

Weight: 370g

 

Wiring:

Red: A+

Green:A-

Yellow:B+

Blue:B-

 

 

Step angle accuracy: ±5%(full step,no load)

Resistance accuracy: ±10%

Inductance accuracy: ±20%

Temperature rise: 80°C Max(rated current,2 phase on)

Ambient temperature: -20° ~ +50°C

Insulation resistance:100MΩ Min,500VDC

Insultion Strength: 500VAC for one minute

 

Stepper Motor
Holding Torque 74 oz-in, 52 Ncm, 5.3 kg.cm
Max. Current 1.8 Amps per phase
Phase Inductance 3.2 mH
Winding Resistance 1.8 ohms

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



© MAKERshop 2017